Maquina De Coser Mero Free End Of

Un da hablando con mi madre la dije: - ama, cmo me gustara tener una overlock - qu es eso me pregunt:, (eng sub):, (eng sub) - YouTube Youtube Sewing Blouse Models Blouse Patterns Sewing Tutorials Gold Closets Dressmaking Couture Patron sobre medida de blusa basica EL CORTE DE ORO Trazo de patron de blusa en 10 minutos con EL CORTE DE ORO - LUTTERLOH SYSTEM - patrones sobre medida.Modelo de blusa del Supplemento 304: Pinterest Explore Log in Sign up Privacy.

Packaging Chairs Lights, Motors, Stands Tables Labor Saving Devices Chain Cutters Folders Single Needle Gauges Bookmark This Site --.

If a new window does not open when you click a link, it may already be open in a browser window behind this one.

Close that new window when you are finished to return to this page.

You can find your sewing machine model number on the back of your machine, on the Nomenclaure Plate.

Enter the first eight digits of this number, followed by an asterisk (example: 385.15208) opener 2 I2Wl 191m.

Presser Foot Lifter ( Presser foot lifter ( Normal up position ( Highest position The presser foot lifter raises and lowers the presser foot.

Attaching the table Push the extension table until it snaps into the machine.

Extension table ( Pin Holes.Tab.

Presionar ta palanca situada en fa posterior del soporte del prensatelas prensatetas caer.

A fine thread and needle should be used for sewing lightweight fabrics, so the fabric will not be marred.

In the needle set, there is one each of sizes 11, 14, 16, and 18, and a blue needle, Use the blue needle to eliminate skipped stitches when sewing knits and synthetic fabrics.

Maquina De Coser Mero Free End Of

With the free end of the thread held in your hand, depress the foot control.

Stop the machine when the bobbin has made a few turns, and cut the thread close to the hole in the bobbin.

Continue to draw the thread under the tension spring ( and through the opening, Pull out about 4.

Place a spool on the spool pin, with thread coming off as shown.

Correct tension ( Needle thread (Top thread) ( Bobbin thread (Bottom thread) ( To loosen To tighten The ideal straight stitch has threads locked between two layers of fabric, as illustrated (magnified to show detail).

If you look at the top and bottom of a seam, notice that there are no gaps.

NOTE: To avoid needle or fabric damage, make sure the needle is up and out of the fabric while selecting a stitch, Stitch patterns are color-coded to recommended zone on the stitch length control, ZONES.

Topstitching i or2 ( Stitch pattern selector: ( Presser foot: Zigzag foot Straight stitch foot 2to6 ( Needle thread tension.

Fold back the lower layer seam allowance to leave a 18 (0.4 cm) margin of fabric ().

Start overcasting about 18(03 cm) inside the raw corner of a fabric.

Fold the fabric and stitch on the bias ( You may need to increase the needle thread tension slightly Allow the needle to just clear the folded edge of the fabric.

Clean the outside of the machine with a soft cloth and mild soap.

Oil the shuttle area Open the shuttle cover by pulling down the embossed.

For Sears professional and items like garage door openers and water heaters.

MY-HOME Call anytime, day or night (USA, and Canada) For repair of carry-in items like vacuums, and electronics, i:ii II.